Winter Dryness Is Coming to South Dakota

by | Energy Audit, HVAC, Temperature Control

Static shocks at every door handle. Cracked knuckles that won’t heal. A scratchy throat every morning. Hairline gaps opening up between the boards of your wood floor. If any of that sounds familiar, you’ve already met South Dakota’s winter air.

From Sioux Falls offices and schools to Rapid City homes and Black Hills warehouses, the same thing happens every year. Cold outdoor air holds very little moisture. When it’s pulled inside and heated all day, its relative humidity drops sharply. The EPA recommends keeping indoor humidity between 30% and 50%, but many heated buildings fall below 30% by midwinter if nothing is done to add moisture back.

At Climate Control Systems and Service, we hear about these symptoms every season – from homeowners, facility managers, and building occupants alike. The good news is that dry indoor air is a solvable problem, and the time to solve it is now, before deep winter sets in.

What Dry Air Does to People and Buildings

Dry indoor air is more than a nuisance. It affects the people inside a building and the building itself.

Health and comfort. Low humidity pulls moisture from the skin, eyes, nose, and throat. That shows up as cracked hands, itchy skin, irritated eyes, nosebleeds, and morning sore throats. Dry air can also dry out the sinuses and aggravate asthma, allergies, and other respiratory conditions – a real concern in schools, healthcare facilities, and offices where people spend eight or more hours a day.

Static electricity. Static shocks become more frequent as indoor air gets drier. In commercial settings, static can also be a concern around sensitive electronics.

Wood floors, trim, and furnishings. Wood gains and loses moisture with the air around it. The National Wood Flooring Association’s guidelines call for 30%–50% relative humidity year-round. When the air gets drier than that, boards shrink and gaps open up. Over time, wood trim, cabinetry, doors, musical instruments, and furniture can crack or warp.

Productivity and complaints. When occupants are uncomfortable, they notice. Facility managers often hear about “stuffy” or “scratchy” air long before anyone thinks to check a humidity reading.

The Hidden Energy Cost: Thermostat Creep

Here’s the part most people miss: dry air can make you feel colder at the same temperature. Moisture evaporates from your skin faster in dry air, and that evaporation carries heat away. So the same thermostat setting can feel chillier in a dry building than in one with balanced humidity.

The natural response is to nudge the thermostat up. Then up again. Across a whole building and a whole heating season, that “thermostat creep” adds up. The U.S. Department of Energy notes that even a few degrees on the thermostat can make a measurable difference in annual heating costs.

In other words, an uncomfortable building often becomes an expensive one. Bringing humidity into a healthy range can let occupants feel comfortable at a lower setpoint, which is exactly the kind of efficiency gain we look for in every project.

How Climate Control Helps

Handheld room humidifiers can take the edge off in a bedroom, but they aren’t a real solution for a whole home or a commercial facility. They need constant refilling and cleaning, they only treat one space, and they don’t communicate with your heating system. A properly designed climate control system does.

Whole-home and whole-building humidification. Humidifiers installed with your HVAC system add moisture to the air as it is heated and distributed, so every room benefits. For homes, that typically means a unit mounted on the furnace or air handler. For commercial buildings, humidification can be built into air handling units and make-up air systems sized for the space.

Smart controls that know when to stop. More moisture isn’t always better. Above 50%, humidity can lead to window condensation, mold, and dust mites – and on South Dakota’s coldest days, even moderate humidity can fog windows. The right setpoint shifts as outdoor temperatures change. Modern controls adjust humidity automatically based on outdoor conditions, keeping air comfortable without creating moisture problems.

Building automation for commercial facilities. As the authorized Automated Logic dealer for South Dakota, we integrate humidity monitoring into WebCTRL building automation systems. Facility managers can see temperature and humidity in real time, zone by zone, receive alerts when conditions drift, and trend the data across the season. That’s the same approach we use to monitor critical spaces like data centers for clients including Pete Lien & Sons and the Rapid City Public Library.

Maintenance that keeps it working. An existing humidifier that hasn’t been serviced may not be doing anything at all. Clogged pads, mineral buildup, failed valves, and closed dampers are common. A pre-winter check makes sure the equipment you already own is actually running – and running cleanly.

Why Start With an Energy Audit and Consultation

Dry air is often a symptom, not the whole story. The complaints your occupants report – cold spots, scratchy throats, static, rising bills – usually trace back to how the entire building is performing. That’s why we recommend starting with an energy audit and consultation instead of simply adding equipment.

An energy audit from Climate Control Systems and Service can help:

  • Measure what’s actually happening. We look at real temperature and humidity conditions across the building, not just what the thermostat says.
  • Find the root cause. Air leaks around windows, doors, and roofs pull in dry outdoor air and push humidity out. Over-ventilation during unoccupied hours does the same. Fixing those issues can reduce how much humidification you need in the first place.
  • Assess your existing equipment. We check whether current humidifiers, air handlers, and controls are working, correctly sized, and integrated.
  • Size the right solution. Using building load calculations and energy modeling, we recommend humidification and control upgrades that fit your building – whether that’s a single home or a multi-building campus.
  • Account for the energy trade-off. Adding moisture to air takes energy too. A good audit weighs that cost against comfort, health, and the savings from a lower thermostat setting, so the recommendation makes financial sense.
  • Build a prioritized plan. You get clear, actionable recommendations – quick wins first, bigger upgrades when they make sense.

For homeowners, a consultation answers a simpler question: does adding whole-home humidification make sense for your house, and what will it take? For facility managers, an audit turns occupant complaints into data you can act on.

Your Pre-Winter Humidity Checklist

Before the deep cold arrives, take these steps:

  1. Check your humidity. An inexpensive hygrometer will tell you where you stand. Aim for roughly 30%–40% in winter, adjusting lower on the coldest days if windows start to fog.
  2. Have existing humidification inspected and cleaned. Replace pads or filters, clear mineral buildup, and confirm water supply, drains, and dampers are working.
  3. Confirm your controls. Make sure humidistats and building automation setpoints are correct and adjust for outdoor temperature.
  4. Watch for warning signs. Static shocks and new floor gaps mean air is too dry. Condensation on windows or musty smells mean it’s too humid.
  5. Ask whether adding humidification makes sense. If your home or facility doesn’t have it, a consultation will tell you whether it’s worth it.
  6. Schedule an energy audit. Address air leaks, ventilation, and controls so your system isn’t fighting dry air all winter.

Breathe Easier This Winter

Winter in South Dakota is going to be dry. Your building doesn’t have to be. With the right humidification, smart controls, and a clear picture of how your building performs, you can keep occupants comfortable, protect your floors and finishes, and stop chasing comfort with the thermostat.

At Climate Control Systems and Service, we’ve been helping homes and commercial facilities across South Dakota stay comfortable and efficient since 2012. With offices in Rapid City and Sioux Falls, our team can check your existing system, recommend whether humidification makes sense, and perform an energy audit that gets to the root of what your occupants are feeling.

Ready to get ahead of winter dryness? Contact us today to schedule a humidification check, consultation, or energy audit. Call 605-721-7177 or send us a message to get started.

Stay comfortable, The Climate Control Systems and Service Team Comfort, Efficiency, and Trust – since 2012

Sources

Past and Current Projects

Temperature Control

Oyate Health Center

Climate Control Systems & Service is the authorized Automated Logic dealer for South Dakota and nearby regions, led the integration of advanced building systems at the new 200,000-square-foot Oyate Healthcare facility. With over 340 controllers managing HVAC, energy, and safety systems, we delivered a seamless, user-friendly platform focused on patient comfort, energy efficiency, and regulatory compliance.

Read More